This is a wonderful replacement screen for your PSP Go.Note: Make sure you have a quality thin ended needle nose pliers at hand when replacing. There is one ribbon connector in particular that you should carefully pull out using the plastic pull tab (on end of ribbon). This is the cable beside the joystick (but not the joystick cable). Most videos show using a plastic spudger or plastic pick to pull against the cable itself. This is fine one or two disassembly, but you run the risk of causing the ribbon contacts to break. Carefully pulling on the ribbon cable plastic pull tab avoids this all together. The benefits of having the right tools will save you a lot of headaches for sure.